Refinishing Pens | CA Finish | Live Stream 6.30.2020

During last night’s live stream, I showed off last week’s project, which was a tiny giant that was dressed in a DiamondCast blank. After that, I did an unboxing/mail call that included items from TShadow & Co. Some of the items came in handy right away as  I used the smock and disassembly vice jaws on the live stream. Other items will come in handy later, like the magnifying glasses, braid, CA non-stick bushings, and Zona Paper.

Patreon: Thank you to my top tier patrons, Mark & Angi! If you’re interested in becoming a patron at any level, check out the link here: Become a Patron!

Supporting Cross Cut Creations:

If you’re interested in supporting the Cross Cut Creations shop, there are a number of different ways to do that. Here are a few:

  1. Watch (and participate in) Youtube live streams and videos on my channel (to help with watch time). This is a completely FREE way to show support for the channel.
  2. Patreon is a way to support me monthly. There are four different tiers and support at any level is appreciated. Use the link above to check out patreon.
  3. My online store has hand crafted items as well as logo apparel. Buying something from the online store is a great way to show support.
  4. Amazon affiliate links are another awesome option for showing support. When using an affiliate link, as soon as one of the links is clicked (on my YouTube videos (in the description) or on my website under the “Tools I Use” tab), anything bought using that link will give me a small percentage back no matter what is bought. If a link for a tool is clicked, but that tool isn’t purchased, that’s okay. If shopping is done, no matter what the item(s), as long as the link is used, I get credit. The great thing about this option is that it costs NOTHING EXTRA! There is no additional fee for using affiliate links.
  5. The donate button on the right hand side of my home page allows for a one time donation if a monthly patreon pledge isn’t of any interest. This is also a great option in lieu of a super chat on YouTube live streams. I can’t do super chats on live streams since I don’t have monetization enabled (because I don’t have the required watch time yet).

Refinishing Two Pens:

I started by using a set of punches and the pen disassembly jaws from TShadow & Co. to take apart the pens. Once I had the blanks by themselves, I was ready to put them on the lathe and get to work.

Sometimes a CA finish cracks or spiderwebs over time and the pen needs to be sanded down and refinished, so I did that with two pens, a zen and a mini bolt action. I refinished the pens on a mandrel, so I was able to refinish two pens at the same time, which was efficient.

The first thing I did was take some 120 grit sandpaper and sanded down the blanks to take off the existing, cracked finish. Once I was down to the raw resin and wood, I dry sanded with Abranet from 120 grit up to 400 grit. Since these pen blanks were hybrids, I wiped some denatured alcohol on the blanks to clean the dust off in preparation of putting on a CA finish. To put a CA finish on pens, I use Mercury Flex Thin CA glue. I apply seven coats and I spray activator between each coat. Once the final coat of CA was applied, I used Micro Mesh (1,500 grit – 12,000 grit) to wet sand the high spots in the CA finish. After Micro Mesh, I used Novus 3, 2, and 1 to polish the blanks. Finally, once the Novus was applied to the blanks, I took the pens over to the assembly table for final assembly and they were ready to go again.

Pressing the mini bolt action pen was pretty straight forward. I did loosen the set screw in the cap so I could adjust the bolt and reposition the clip, but then pressing the cap and nib into the blank went smoothly. After assembling the mini bolt action, I assembled the zen. The zen was super easy to assemble as all that’s required is to press the cap into the one end and a threaded grommet into the other end. I put the ink in the pen, threaded the nib onto the pen, and our assembly of our fixed pens was complete! Seeing the difference between the old, cracked finish, and the refinished pens was amazing! Here’s how the pens look after being rejuvenated with a new CA finish:

These pens were refinished on the live stream from 6.30.2020 and given new life.

If you’d like to watch a replay of the live stream, you can catch it here: