Casting With Alumilite Clear Slow | Live Stream 6.9.2020

On last night’s live stream, I decided to cast some Alumilite clear slow. Going into the live stream, I didn’t know exactly what I wanted to cast, so with the help of the audience, I decided to cast some sweet gum pod call/handle blanks. Five* different colors and were used for this cast.

Show and tell: I showed off last week’s casting results. Four bottle stopper blanks with walnut shells and three Alumilite clear slow pen blanks for a total of seven blanks were cast. Additionally, I bought a chaos blank and a box of chaos cutoffs from Bob over at RJBWoodTurner. The chaos blank that I bought will become a pen that will be a giveaway for reaching 1,000 subscribers on YouTube! That video will be out as soon as I can make the pen and edit the video. If you want a chance to win the pen, you must be a subscriber, so if you haven’t subscribed to my YouTube channel, be sure to do that. Here’s a link to do that: https://www.youtube.com/channel/UC54fkSR_LBTnG69wcy8G3Gg

Breaking News: The colors used in this live stream were based on baby colors because my wife and I are expecting our first child in October! We are super thrilled and couldn’t be happier. SPOILER ALERT: We can’t wait to meet our DAUGHTER!

I used five colors, but mixed two of them to create a “custom color”, so it ended up being four colors. The four colors were mixes of blues and pinks. I poured 90 grams of A and 90 grams of B since Alumilite clear slow is mixed in a 1:1 ratio. There was a few other partial blanks, but here is a picture of the result of last night’s cast:

These sweet gum pod blanks were cast on a live stream on YouTube. They measure 1.5″ square and 6″ long.

Patreon Support: Thank you to my patrons, Mark & Angi! I really appreciate the support! If you would like to support what I do on YouTube, here is a link to Patreon, but as always, no pressure: Become a Patron!

If Patreon isn’t the way you’d like to show support, there are other ways to do that. First, if you’d like to make a one time donation, there is a link on the right hand column to donate. The next option, in my store on my website, making a purchase of any kind (logo gear or handmade products/projects) are a good way to support what I do, but an even better way to support what I do without spending anything extra, is to use the Amazon affiliate links I have. I get a small percentage of whatever you buy using those links, even if you don’t buy the linked tool/product. You can find the affiliate links in two places. Either use the Amazon links under the “Tools I Use” section on my website, or use the links in the description of my YouTube videos. Finally, an awesome FREE option to support me is to subscribe to my YouTube channel and participate in the chat during the live streams I do.

If you want to check out the replay of the live stream, you  can check it out here:

Thank you for checking out this post and taking the time to read this. It means the world to me that you chose to spend some of your time reading my recap of last night’s live stream. I really do appreciate the support you give me at any level. If all I ever saw was some community engagement, that’s what makes me happy. Until next week, I’ll see you on the next live stream.

Casting Pen Blanks Tutorial

First off, sorry this article is so late.  I got caught up in work related duties and didn’t have any time to write the article.

I start by using Alumilite, which is a 1:1.  I used 50g of each color, so when you pour 50g of A, you need to pour 50g of B.  This allows the reaction in the resin to properly set up.  I used twp colors: vibrant pink and silver.

I start by pouring 50g of the “A” side twice (one for each color).  Then, I introduce my Caster’s Choice mica powders and stir until the powder is stirred in and there appears to be no more visible powder.  I stir in both colors separately, then move on.  There is no correct amount of powder that you need to use.  If you like a more translucent appearance, put less powder in the resin.  If you want a more solid appearance, put more mica powder in the resin.

Once I stir in both mica powders, I introduce the “B” side of Alumilite resin and since I poured 50g of A, I poured 50g of B.  As soon as the “B” side is poured into the “A” side, the reaction starts.  Depending on the temperature of your shop, the resin will take longer or shorter to set up.

As I introduce the “B” side into the “A” side, I start to stir the resin.  You can under-stir, but you can’t over-stir, so consistently stirring is important.  I stir until the resin gets up to 90 degrees.  This is the temperature where you get good color separation.  If you pour before the 95 degree mark, you could get runny colors and your mixture won’t look as good as they could have.

After both colors got to 95 degrees, I poured the Alumilite into the molds and let the resin set up in the mold for 2 hours.  When I took the pen blanks out of the pressure pot, I removed the blanks from the molds and cleaned them up on the band saw.

I can’t wait to turn these and see what they look like on a pen kit!

If you have any questions, or comments, don’t hesitate to comment on the youtube video (in the “YouTube Videos” tab on this website), email me, or contact me any way you know how.

Thanks for checking out the article and video.  We’ll take to you later!

-Robert

My First Resin Casting Experience

Yesterday I posted a video documenting my first resin casting experience.  This was a new skill I wanted to learn and I have a plethora of resources.  As I went through my first cast, I realized this is something I really enjoy.  For my first cast, I used Alumalite clear.  This resin is a two part resin – Part A (resin) and Part B (hardener).  The ratio is 1:1 (A:B).  This makes it easy to remember and it’s also nice that it’s easy to turn.

I started by laying out my cups and marked them A or B depending on which part I was pouring.  I did a three color pour, which included Phoenix Orange, Midnight Purple, and Teal at the suggestion of Greg Bonier.  (Thanks, Greg!)  I was prepared to pour resin into a four blank mold with each cavity being 7/8″x7/8″x5.25″ blanks.  I also got a tube-in mold for Sierra type pens.  When I finished pouring the resin for the four blank mold, I had enough resin to pour into the tube-in molds.  Because I wasn’t prepared to use the tube-in molds, the extra resin started to set up and the cast wasn’t really pretty.  This turned out okay though, because the “ugly” portion turned off nicely and left an awesome finished blank.

After pouring the resin into the molds, I put the molds in the pressure pot for two hours at 50 psi.  I took the blanks out after two hours and realized I forgot the mold release, but this wasn’t the end of the world as the blanks popped out of the molds relatively easily.  I did have some additional issues with the tube-in castings, but I will detail that at another time.

I plan on doing another casting video at some point where I’ll detail the process I use in a future video in more detail.  I absolutely love casting, and now I need more resin.  Tim to go sell a few pens to be able to afford more resin!

If you have any questions, comments, or anything else, feel free to contact me!

-Robert