Casting Pen Blanks Tutorial

First off, sorry this article is so late.  I got caught up in work related duties and didn’t have any time to write the article.

I start by using Alumilite, which is a 1:1.  I used 50g of each color, so when you pour 50g of A, you need to pour 50g of B.  This allows the reaction in the resin to properly set up.  I used twp colors: vibrant pink and silver.

I start by pouring 50g of the “A” side twice (one for each color).  Then, I introduce my Caster’s Choice mica powders and stir until the powder is stirred in and there appears to be no more visible powder.  I stir in both colors separately, then move on.  There is no correct amount of powder that you need to use.  If you like a more translucent appearance, put less powder in the resin.  If you want a more solid appearance, put more mica powder in the resin.

Once I stir in both mica powders, I introduce the “B” side of Alumilite resin and since I poured 50g of A, I poured 50g of B.  As soon as the “B” side is poured into the “A” side, the reaction starts.  Depending on the temperature of your shop, the resin will take longer or shorter to set up.

As I introduce the “B” side into the “A” side, I start to stir the resin.  You can under-stir, but you can’t over-stir, so consistently stirring is important.  I stir until the resin gets up to 90 degrees.  This is the temperature where you get good color separation.  If you pour before the 95 degree mark, you could get runny colors and your mixture won’t look as good as they could have.

After both colors got to 95 degrees, I poured the Alumilite into the molds and let the resin set up in the mold for 2 hours.  When I took the pen blanks out of the pressure pot, I removed the blanks from the molds and cleaned them up on the band saw.

I can’t wait to turn these and see what they look like on a pen kit!

If you have any questions, or comments, don’t hesitate to comment on the youtube video (in the “YouTube Videos” tab on this website), email me, or contact me any way you know how.

Thanks for checking out the article and video.  We’ll take to you later!

-Robert

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.